Research Experience

A          THESES/DISSERTION

  1. Adisa, A. B. (1989): Design and Construction of a Multipurpose Thresher. (Bachelor’s Degree Thesis) Mechanical/Production Engineering Programme, Abubakar Tafawa Balewa University, Bauchi
  2. Adisa, A. B. (1994): A computer program for the Automatic Renumbering of Finite Element Nodes. (Master’s Degree Thesis) Abubakar Tafawa Balewa University, Bauchi.
  3. Adisa, A. B. (2003): Computer aided Modelling and Simulation of a Wood Burning Stove. (Ph.D. Dissertation) Abubakar Tafawa Balewa University, Bauchi.

B          ARTICLES

  1. Adisa, A. Bello (1998): Engineering and Medicine. The Technolight. Vol.1 No.1 pp29 (A publication of NUESA, ATBU, Bauchi)
  2. A. A. Bello (1999): One Bright Quiet Morning… A collection of poems. Bauchi. pp1- 44 (Unpublished)

C          PUBLISHED TECHNICAL PAPERS

1.         JOURNALS

  1. Adisa, A. B., Asere, A. A. and Ngonoue F. T. (1999): Simulation of a job Flow. Nigerian Journal of Tropical Engineering. 1 (1): 1-10.
  2. Adisa, A. B. (1999): Dynamics of Human Locomotion. Bulletin of Science Association of Nigeria. 22 (2): 177-180.
  3. A B Adisa and M L Audu (2000): Automatic Renumbering of Finite Element Nodes. Journal of Engineering Technology and Industrial Applications. 1(1): 40-43
  4. A. A. Asere, A. A. Bello and O. A. Salawu (2003) Temperature Boundary Layer Profiles of Wood Burning Stove. Nigerian Journal of Solar Energy. 14(1): 135 – 139.
  5. Adisa A. B., Sambo, A. S. and Asere A. A. (2004) Simulation of a Wood Burning Stove. N S E Technical Transactions. 39(3): 26-35
  6. G. Egbo, A. B. Adisa, A. A. Asere and Z Ismaila (2004) Calculation Method for determination of Machining Allowance. Nigerian Journal of Tropical Engineering. 5(1&2): 38-42
  7. Adisa A. B and A Baba (2009). Solar Cooking Technology Development in Nigeria.  Journal of the Nigerian Institution of Mechanical Engineers 1(1): 1-8
  8. Ejilah, I.R., Adejuyigbe. I., Adisa, A.B and Asere A.A (2009). Effect of Engine Oil Adulterant on Exhaust Emissions of Two-Stroke Spark Ignition Engine.  Journal of the Nigerian Institution of Mechanical Engineers 1(1): 30-39
  9. Adisa A. B and Dan – Mallam Y (2009). Development of an Automobile Bumper from Sheep Wool Fibre Reinforced Composite.  Journal of the Nigerian Institution of Mechanical Engineers  1(1): 65-73
  10. Ejilah, I. R., Asere, A. A., Adisa, A. B. and Ejilah A. (2010) Effect of diesel fuel – Jatropha curcas oil methyl ester blend on the performance of a Variable Speed Compression Ignition Engine. Australian Journal of Agricultural Engineering, AJAE 1(3): 80-85
  11. Medugu D. W., Burari F.W and Bello A A (2010) Experimental Comparative Study of the Performances of Constructed Reliable Model and Standard Pyranometers. Ozean Journal of Applied Sciences 3(2): 181-189
  12. A. A. G. Olorunnishola, I. R. Ejilah, J.S. Jatau and A. B. Adisa (2009) Effects of Seed Oils and Loading Profiles on Sliding Wear of Annealed Pins Sliding on Mild Steel Disc. Science forum. Journal of Pure and Applied Science. 12(1): 12-18
  13. Adisa A. B., Sambo A. S. and Asere A. A (2010). Technical and Users’ Considerations in wood Burning Stove Design: A Review.  Journal of the Nigerian Institution of Mechanical Engineers  2(2): 19-30
  14. S.I. Ige, A.B. Adisa, and R.I. Ejilah (2011) Determination of Mechanical Properties of Recycled Thermoplastic Materials from Solid Waste Deposits in Bauchi Metropolis. International Journal of Engineering Science  3(3): 149 – 156
  15. Medugu D. W., Adisa A. B., Burari F.W and Abdul’Azeez M. A. (2012) Solar Radiation: Correlation between Measured and Predicted Values in Mubi, Nigeria. International Journal of Science and Technology Education Research 3(1): 7-15
  16. Ejilah, I., Abdulkadir, L., Adisa, B. (2012) Investigation of extracted Sclerocarya birrea seed oil as a bioenergy resource for compression ignition engine. International Journal of Agricultural and Biological Engineering, IJABE 5(3): 59-67
  17. Sadiq, Q. S. and Adisa, A. B (2012) Investigation on the suitability of sawdust for improving the compressive strength of fibre reinforced polyester composite. Journal of Engineering and Technology JET 7(1 & 2):88 – 92.
  18. Abdullahi A., Adisa, A. B., and Dandakuta H. (2013) An evaluation of wind energy potential in the northern and southern regions of Nigeria on the basis of Weibull and Rayleigh models. American Journal of Engineering 1(3): 37- 42
  19. A. Ahmed, A. A. Bello, D. Habou (2013) An investigation of wind characteristics and techno-economic evaluation of wind energy in Nigeria. International Journal of Energy and Power Engineering 2(5): 184-190
  20. Abioye, A. M., Abdulkadir, L. N., Adisa, A. B. and Gai, F. P. (2013) Behavioural Analysis of Diesel, Diesel-Neem Blends in a Single Cylinder, Four Stroke, Air-Cooled Compression Ignition Engine. International Journal of Research and Advancement in Engineering Science. 3(1): 147-157
  21. A. Ahmed, A. A. Bello, D. Habou (2014) Analysis of Wind Energy Potential in North East Nigeria. Journal of Energy and Natural Reources 3(4): 46-50
  22. Abdulkadir L. N, Adisa A. B., Kyauta .E. E, Raheem M. A (2014) Corrosion and Engine Test Analysis of Neem (Azadirachta indica) Oil Blends in a Single Cylinder, Four Stroke, and Air-cooled Compresion Ignition Engine. American Journal of Mechanical Engineering 2(6): 151-158
  23. Abdulkadir, L.N, Adisa, A.B, Kyauta E .E., Balogun, S (2014) Extraction, physico-chemical, corrosion and exhaust analysis of transesterified neem (Azadirachta indica) oil blends in compression ignition (CI) engine. American Journal of Engineering Research (AJER) 3(1):130 – 180
  24. Ismaila J. Y., Habou D and A. A. Bello (2014) The Use of Multi-Feed Substrates for Biogas Production. Journal of the Nigerian Institution of Mechanical Engineers 4(1): 12 – 21.
  25. Ahmed A, A. A. Bello and Habou D (2014) Energy Analysis and Prospects for Sustainable Wind Power in Nigeria. Journal of the Nigerian Institution of Mechanical Engineers  4(1): 80 – 88
  26. Kyauta E. E., Adisa A.B., Abdulkadir L.N. and Balogun S., (2015) Production and Comparative Study of Pellets from Maize Cobs and Groundnut Shell as Fuels for Domestic Use. American Journal of Engineering Research (AJER). 1(4): 97 – 102.
  27. Adisa, A. B., Gai, F. P. and Ejilah I. R. (2015) A Physico-Mechanical Properties Study of an Automobile Fender Produced from Agave Sisalana Fibre-Polyester Reinforced Composite Material Journal of the Nigerian Institution of Mechanical Engineers  5(1): 94 – 111
  28. Shuaibu, N., Dandakouta, H., and Bello A. A. (2015) Studying the effect of Binder Ratio on the relaxed Density Compressive Strength and durability of Sawdust Briquettes. International Journal of Mechanical Engineering Research (IJMER). 1(3) (6 pages) www.iiardonline.org
  29. Shuaibu, N., Dandakouta, H., and Bello A. A. (2015) Effect of some Densification Parameters on the Physical and Combustion characteristics of Sawdust Briquettes. International Journal of Mechanical Engineering Research (IJMER). 1(3)(10 pages) www.iiardonline.org
  30. Nasiru Shuaibu, Habou Dandakouta, and Adisa, A. Bello (2016) Evaluating Groundnut Shell Briquettes as High Grade Fuels for Domestic Cooking; Part 1: Modeling the effect of Processing Parameters on the Physico-Mechanical Characteristics of the Briquettes. International Journal of Engineering and Modern Technology 2(1)(7pages) ISSN 2504-8856, www.iiardpub.org
  31. Nasiru Shuaibu, Habou Dandakouta, and A. A. Bello (2016) Evaluating Groundnut Shell Briquettes as High Grade Fuels for Domestic Cooking; Part 2: Modeling the effect of Processing Parameters on the combustion Characteristics of the Briquettes. International Journal of Engineering and Modern Technology 2(1)(7pages) ISSN 2504-8856, www.iiardpub.org.
  32. A. Ahmed, A. A. Bello and D. Habou (2016) Performance Analysis of a 5.5 meter Three-Bladed Rotor Horizontal Axis Wind Turbine. Journal of the Nigerian Institution of Mechanical Engineers  6(1): 41 – 50
  33. I. S. Sintali, H. Dandakouta, R. I. Ejilah and A. B. Adisa (2016) Model Validation of Solar Parabolic – Trough Collector using Solar Topocentric Coordinates of Bauchi. Journal of the Nigerian Institution of Mechanical Engineers  6(1): 51 – 70
  34.  Yakubu G., Adisa, A.B., Farinwata S. S., Shehu Y., Mohammed S. (2017) Simulation and Analysis of Active Damping system for Vibration Control. American Journal of Engineering Research (AJER) 6(11):29-38
  35. A. S. Sadiq, A. A. Bello and A. Tokan (2017).Assessments of Physico-chemical properties of some species of Mango (Mangifera indica) kernel oils for bio-resin production. Nigerian Journal of Tropical Engineering (NJTE) 10(1 & 2): 35 – 44
  36. A. S. Sadiq, A. A. Bello, A. Tokan and S. Abdulsalam (2018). Production and analysis of epoxidized oil from Rosigold mango (Mangifera indica) kernel oil for bioresin synthesis. Journal of the Nigerian Institution of Mechanical Engineers. 8(2): 58 – 69
  37. A. S. Sadiq, A. A. Bello, A. Tokan and S. Abdulsalam (2018).Production and Analysis of Bioresin from Mango (Mangifera Indica) Kernel Oil. International Journal of Modern Research in Engineering and Technology (IJMRET). 3(12): 5 – 16
  38. Nuhu Mohammed, Ademola Bello Adisa, Mohammed Ahmed Bawa, Habou Dandakuta (2018) Design of Wind/Diesel Generator Micro-Grid Power System in Kano, Nigeria, Using Homer. International Journal of Engineering & Technology, 7 (3.36) 16-22 
  39. Kyauta EE, Bello AA, Habou D, Ejilah RI (2018) Availability Assessment of Groundnut and Beans Residue Using Remote Sensing and GIS-A Case Study of Bogoro Local Government Area, Bauchi State, Nigeria. J Remote Sens GIS 7: 249. 7(3) 1-5
  40. A.S. Sadiq, A.A.Bello, M.A. Bawa (2019) Determination And Analysis of Mechanical Properties of Cast Resin From Mango (Mangifera Indica) Kernel Oil International Journal of Engineering Trends and Technology, 67(9), 63-68

2.         PUBLISHED CONFERENCE PROCEDINGS

  1. Adisa, A. B. & Ngonoue F. T. (1997): Optimization of Production Schedules in a job Shop. Proceedings of Fourth National Engineering Conference Series, Kaduna. 4(1): 127-136
  2. Adisa, A. B. (1998): Recycling Carbon black pigmented polyethene bags. Proceedings of Fifth National Engineering Conference Series, Kaduna. 5(2): 224-226
  3. Adisa A B and Kyauta E E (2005) Pellets of Groundnut shells and Maize cobs as fuel for domestic use. Technical Proceedings of the Nigerian Metallurgical Society (NMS). 22nd Annual Conference and General Meeting, Makurdi, 2005. pp 95-100
  4. A. A. Bello (2006) Adaptive Renewable Energy Technology: The Household in Focus. The Nigerian Society of Engineers Bauchi Branch Lecture Series. pp 21-40
  5. Adisa A B (2007) Renewable Energy for Cooking: The Role of the low-cost Plastic Biodigester. Proceedings of the 20th Annual Engineering Conference and General Meeting of the Nigerian Institution of Mechanical Engineers (NIMechE). pp61-66
  6. R. I. Ejilah, E. I. Onuh, S. Datau, J. S. Jatau and A. B. Adisa (2009) A Study of the Effect of Post-Weld Heat Treatment (PWHT) on The Torsional Behaviour of Low – Carbon Steel. Proceedings of the 22nd AGM and International Conference of the NIMechE (Nigerian Institution of Mechanical Engineers). Pp 14 – 19
  7. Ejilah, R. I., Adisa, A. B., Dzer, P., Otitoyomi, V. and Dodo, J. (2009) Investigating the Influence of Brine and Seed-Oil Quenchants on Mechanical Property of Quenched Mild Steel.Proceedings of the 22nd AGM and International Conference of the NIMechE (Nigerian Institution of Mechanical Engineers). Pp 98 -106
  8. Adisa, A. B and B. Alfa (2009) Solar Energy Characterization and Utilization in the North East, Nigeria. Proceedings of theTwo Day Symposium on Sustainable Fossil Fuel and Renewable Energy in the North East and other Related Regions of Nigeria, organized by the National Centre for Petroleum Resources and Development, Energy Commission of Nigeria. Ramadan Press Bauchi. Pp105-122
  9. Ejilah I. R., Olorunnishola A. A. G., Onuh E. I. and Adisa, A. B. (2010) Sliding Wear behavior of Normalized Mild Steel Pins under Varying Load, Lubrication and Surface Texture. Proceedings of the 23rd AGM and International Conference of the NIMechE (Nigerian Institution of Mechanical Engineers). Pp 21 – 31.
  10. Adisa, A. B. (2010) Challenges and contributions for Mechanical Engineers: A call to the Nigerian Mechanical Engineer. The Bauchi Mechanical Engineer. A publication of NIMechE Bauchi Chapter. Pp 20 – 24.
  11. Gai, F. P., Adisa A. B. and Abdulkadir, L. N. (2011) Viability of Sisal-Reinforced- Polyester Composite as a Material For Car Fenders. Proceedings of the 1st AGM and Conference of the AutoEI (Automotive Engineers Institute) National Conference and Annual General Meeting Vol. 1 pp15-18
  12. Abdulkadir L. N., Adisa, A. B., Ejilah, I. R. and Babuje A. U., (2011) Extraction and Physico-Chemical analysis of Marula (Scelerocarya Birrea) oil for biodiesel Production. Proceedings of the 24th AGM and International Conference of the NIMechE  pp 98 – 105.
  13. Abubakar U. A., Adisa, A. B. and Ejilah, R. I. (2011) An Appraisal of Combustion Characteristics of Some Nigerian Fuel Woods. Proceedings of the 24th AGM and International Conference of the NIMechE NIMechE/2011/003. (E-Copy)
  14. A. Ahmed, A.A. Bello and D. Habou (2014) Analysis of Wind Power Density Based on the Weibull and Rayleigh Models in South East Nigeria, Enugu. Proceedings of the Conference on the theme: Engineering and Technology for Economic Transformation organised by theFaculty of Engineering, Ahmadu Bello University, Zaria, Nigeria
  15. Ismaila, J. Y, Habou, D., and Bello, A. A. (2014) The use of Multi-Feed Substrates for Biogas Production. Proceedings of the 27th Annual Engineering Conference and General Meeting of the Nigerian Institution of Mechanical Engineers (NIMechE) pp61-66
  16. A. Ahmed, A.A. Bello and D. Habou (2014) Energy Analysis and Prospects for Sustainable Wind Power in Nigeria. Proceedings of the 27th Annual Engineering Conference and General Meeting of the Nigerian Institution of Mechanical Engineers (NIMechE) pp118 – 125.
  1. G.A.Duvuna, A.A.Bello, R.I. Ejilah and H. Dandakuta (2014) Improving Domestic Solar Water Heating Technology in Nigeria:  A Research Review. Proceedings of the 27th Annual Engineering Conference and General Meeting of the Nigerian Institution of Mechanical Engineers (NIMechE) pp 193 – 204
  2. Amos, S. O., Pam, G.Y., and Adisa, A. B (2014) Cost Comparison of Diesel, Wind and Solar Water Pumping Options for Dalla farms, Kaduna. Proceedings of the 27th Annual Engineering Conference and General Meeting of the Nigerian Institution of Mechanical Engineers (NIMechE) pp 208 – 216
  3. A. S.  Sadiq, A. A. Bello and A. Tokan (2016), Shift towards using renewable oil for resin production for fibre reinforced composite materials in Nigeria. Proceeding of the 29th AGM & International Conference of the Nigerian Institution for Mechanical Engineers (NIMechE) pp1-18

3.         CONFERENCE PAPERS(Presented)

  1. Adisa A. B, Sambo A. S and Asere A. A. (1999) Modeling the combustion chamber of the wood burning stove. National Solar Energy Forum NASEF ’99. University of Ilorin main Campus, Ilorin.
  2. Adisa, A. B., Sambo A. S and Asere A. A.  (2005) Software Development: A case study of the wood burning stove. International Conference on Science and Technology, Federal University of Technology, Akure.
  3. Ejilah, I. R., Asere, A. A., Adisa, A. B. and Ejilah A (2009) Performance Characteristics of a Variable Speed Compression Ignition Engine Run on Jetropha Methyl Ester – Diesel Fuel Blends. 32nd Annual International Conference, Workshop and Exhibition of the Chemical Society of Nigeria. The Multi Purpose Indoor Sports Hall, Bauchi.
  4. S.I. Ige, A.B. Adisa, and R.I. Ejilah (2009) Determination of Mechanical Properties of Recycled Thermoplastic Materials from Solid Waste Deposits in Bauchi Metropolis. Proceedings of Twelfth National Engineering Series Kaduna,
  5. Adisa, A. B. (2010) Corruption: The cause of decline in standard of education in Nigeria. Sensitization Workshop on Anticorruption organized by NYSC Integrity group/EFCC at Government Day Secondary School Shadawanka Barracks Bauchi.
  6. Abubakar U, A., Adisa A. B., and Ejilah, R. I. (2011) An Appraisal of the Combustion Characteristics of Some Nigerian Fuel Woods. Proceedings of National Conference SOSTNATCONF2011, Bauchi

D.        TECHNICAL REPORTS

  1. G. Egbo, A. A. Asere, A. Tokan and A. B. Adisa. (1992): Technical specification and Bill of Quantities covering mechanical services for plant science, School of Agriculture. Main Campus, Gubi, Abubakar Tafawa Balewa University, Bauchi.
  2. M. H. Muhammad, A. A. Bello and B. U. Mustapha (2004): Design of a Rotary Kiln for Gypsum Calcinations. A detailed design presented in respect of National Competition on Design of Process Equipment and Plants organized by Raw Materials Research and Development Council, Federal ministry of Science and Technology, Abuja, Nigeria.
  3. J. S. Jatau, A. A. Bello, D. Habou and B. U. Mustapha (2005): Design of Cassava Pelletizing Equipment. A detailed design submitted to the Raw Materials Research and Development Council, Abuja, under the Raw Materials Research and Development Council/Abubakar Tafawa Balewa University, Bauchi, Linkage.
  4. A. A. Bello (2006): Technical specification and Bill of engineering measurements covering mechanical services for the Yankari Resort Safari Project, Bauchi. Bauchi State
  5. A. A. Bello (2006) Design of Mechanical Services (for all buildings on the) Yankari Resort Safari Project (Air Conditioning, fire fighting, water supply & distribution (hot & cold), soil and waste water disposal and drainage. (62 pages of A2 drawings)
  6. A. A. Bello (2007): Technical report on the installation of solar powered vaccine refrigerators and on – site training of health workers in Adamawa, Borno and Bauchi states of Nigeria.
  7. A. A. Bello (2008): Technical report on the installation and assessment of installed solar powered vaccine refrigerators and on – site training of health workers in Nasarawa state of Nigeria.

E          PUBLIC LECTURES DELIVERED

  1. Adisa, A. B. (1997) The Engineer: Opportunities and Challenges. Guest Lecture delivered at the Fourth Nigerian Universities Engineering Students Association Engineering Week. Abubakar Tafawa Balewa University, Bauchi. Wednesday, July 23rd 1997.
  2. Adisa, A. B. (1998) Engineering and Technology: A Challenge to the Muslim Youth. Guest Lecture delivered at the Muslim Engineering Students Forum. Abubakar Tafawa Balewa University, Bauchi. Sunday, June 7th 1998.
  3. Adisa, A. B. (2000) Technology and Faith. Guest Lecture delivered at the Muslim Engineering Students Forum, Abubakar Tafawa Balewa University, Bauchi. Sunday, August 20th 2000.
  4. Adisa, A. B. (2004) Solar Energy: A viable energy option. Guest Lecture delivered at the 2003 AGM/Public Lecture of the Nigerian Society of Engineers Bauchi Branch. Saturday, 13th March 2004
  5. Adisa, A. B. (2005) In Search of Appropriate Technology for Nigeria. Guest Lecture delivered at the North East Zonal Polytechnics Expo/Competition. Thursday, October 27th, 2005
  6. Adisa, A. B. (2006) Adaptive Renewable Energy Technology: The Household in Focus. Guest Lecture delivered at the 2005 Annual General Meeting/Public Lecture of the Nigerian Society of Engineers Bauchi Branch. Saturday, 18th February 2006
  7. Adisa, A. B. (2008) Challenges and contributions for Mechanical Engineers: A call to the Nigerian Mechanical Engineer. Guest Lecture delivered at the Inauguration of the Jos branch of the Nigerian Institution of Mechanical Engineers (NIMechE). Saturday, 25th October, 2008.
  8. Adisa, A. B. (2010) Mechanical Engineering Designs. Guest Lecture delivered at the Nigerian Institution of Mechanical Engineers (NIMechE) Bauchi Chapter Ordinary General meeting/ Public Lecture Series.  June 23, 2010
  9. Adisa, A. B. (2012) Energy mix for sustainable development in the North East, Nigeria. Guest Lecture delivered at the Nigerian Institution of Mechanical Engineers, NIMechE 2012 PUBLIC LECTURE. 31st May 2012
  10. Adisa, A. B. (2012) Engineering Education and Training in Nigeria for Sustainable National Development. Guest Lecture delivered at the Nigerian Society of Engineers, Jos Branch. First Engineering Conference/AGM. 4th June 2012
  11. Adisa, A. B. (2016) The Soul, Food Security and Engineering: Islamic Perspectives. Guest Lecture delivered at the Muslim Professional Association, Bauchi. Sunday, October 31st 2016.
  12. Adisa, A. B. (2016) Refocusing Engineering Curriculum to serve Nigerian Industrial Needs: the Role of COREN. An invited paper presented at the Academia – Industry Conference with the theme, “Bridging the Gap between Academia and Industry in Nigeria: Refocusing Engineering Discipline” held at Bayero University, Kano. Tuesday, December 6, 2017
  13. Adisa, A. B. (2019) Choosing between Additive and Subtractive manufacturing. An invited paper presented at the 32nd NIMechE International Conference with the theme, “Towards a Modern Manufacturing Technology & Practice for Sustainable National Economic Growth” held at Aridolf Resort & Wellness Spa, Yenagoa, Bayelsa State. Wednesday, October 9, 2019
  14. Adisa, A. B. (2019) Technological Research and Development Challenges: The way forward. Being the Keynote/Lead Paper presented at the 14th Annual National Engineering Conference (ANEC) of the Federal Polytechnic Mubi, Adamawa State, Nigeria, on Wednesday the 13th of November, 2019
CONFERENCES/SEMINARS/WORKSHOPS ATTENDED
  1. Fourth National Engineering Conference, Kaduna. Paper presented: Optimization of production schedules in a job shop. December, 1997
  2. Fifth National Engineering Conference, Kaduna. Paper presented: Recycling Carbon black pigmented polyethene bags. December, 1998
  3. Sixth National Engineering Conference, Kaduna. Paper presented: Automatic renumbering of Finite Element Nodes. December, 1999
  4. National Solar Energy Forum NASEF ’99. University of Ilorin main Campus, Ilorin. Paper presented: Modeling the combustion chamber of the wood burning stove. November 1999.
  5. 37th Annual Conference of Science Association of Nigeria (SAN), Abubakar Tafawa Balewa University/Zaranda Hotel Bauchi. Paper presented: Dynamics of Human Locomotion. August, 1999
  6. Workshop on Solar Energy Utilization for Rural Development. 2000. Organized by Centre for Energy Research, Abubakar Tafawa Balewa University, Bauchi.
  7. National Solar Energy Forum NASEF ’2001. Obafemi Awolowo University, Ile-Ife. Paper presented: Temperature Boundary Layer Profiles of wood burning stove. November 2001.
  8. Nigerian Society of Engineers Annual General Meeting/Conference. November/December, 1999 (Ilorin); November, 2000 (Abuja); November, 2001 (Port Harcourt), December, 2003 (Ibadan)…, December 2008 (Bauchi); December 2009 (Owerri); December 2010 (Abuja); December 2011 (Calabar); December 2012 (Ilorin); December 2013 (Abuja); December 2014 (Abuja);  November 2015 (Akure); November 2016 (Uyo); November 2017 (Abuja); November 2018 (Abuja) and December 2019 (Kano)
  9. Nigerian Society of Engineers Bauchi Branch Ordinary General meeting. Paper presented: Software Development. July, 2003
  10. National Workshop on Capacity Building in Small Hydro Power for provision of Rural Energy. 3rd – 7th May, 2004. Organized in collaboration with Energy Commission of Nigeria and UNIDO at Abubakar Tafawa Balewa University, Bauchi.
  11. International Conference on Science and Technology, Federal University of Technology, Akure. Paper presented: Software Development: A case study of the wood burning stove. August 14th – 19th, 2005
  12. 22nd Annual Conference and General Meeting of the Nigerian Metallurgical Society. North Core Auditorium, Federal University of Agriculture, Makurdi. Paper presented: Pellets of Groundnut shells and Maize cobs as fuel for domestic use.
  13. National Workshop on Review of Renewable Energy Master Plan (REMP) for Nigeria. Organized by Energy Commission of Nigeria in collaboration with UNDP. Abuja Sheraton Hotel and Towers, 22nd – 25th November 2005
  14. National Workshop on National Energy Master Plan (NEMP) for Nigeria. Organized by Energy Commission of Nigeria, Federal Ministry of Science and Technology.  Abuja Sheraton Hotel and Towers, 4th May 2006
  15. Workshop on Solar Refrigerator Maintenance organized by UNICEF D Zone Bauchi for the production of a simple maintenance guide for Cold Chain Officers and Technicians. Development Exchange Centre, Bauchi. 8th – 10th August 2007
  16. 20th National Mechanical Engineering Conference and Annual General Meeting of the Nigerian Institution of Mechanical Engineers (NIMechE). Conference Hall, Arewa House Kaduna. Kaduna State. Paper presented: Renewable Energy for Cooking: The Role of the low-cost Plastic Biodigester.
  17. 21st National Mechanical Engineering Conference and Annual General Meeting of the Nigerian Institution of Mechanical Engineers (NIMechE). Petroleum Training Institute (PTI) Conference Centre, Warri, Delta State. 8th – 10th October, 2008.
  18. Two Day Symposium on Sustainable Fossil fuel in the North East of Nigeria, organized by the National Centre for Petroleum Resources and Development, Energy Commission of Nigeria, Abubakar Tafawa Balewa University, Bauchi: Paper presented: Solar Energy Characterization and Utilization in the North East, Nigeria. Development Exchange Centre, Bauchi. 14th – 15th of May, 2009
  19. The Nigerian Institute of Management International Conference, (2009), Abuja
  20. 32nd annual International Conference, Workshop and Exhibition (Bauchi 2009) of the Chemical Society of Nigeria. The Multi Purpose Indoor Sports Hall, Bauchi. 6th – 9th October, 2009. Paper presented: Performance Characteristics of a Variable Speed Compression Ignition Engine Run on Jetropha Methyl Ester – Diesel Fuel Blends.
  21. 22nd Annual General Meeting and International Conference of the Nigerian Institution of Mechanical Engineers (NIMechE). Royal Spring Holiday Inn Osogbo, Osun State. 21st  – 23rd October, 2009. Paper presented: Effect of Post-Weld Heat Treatment on the Torsional Behaviour of Low – Carbon Steel.
  22. 22nd Annual General Meeting and International Conference of the Nigerian Institution of Mechanical Engineers (NIMechE). Royal Spring Holiday Inn Osogbo, Osun State. 21st  – 23rd October, 2009. Paper presented: Investigating the Influence of Brine and Seed-Oil Quenchants on Mechanical Property of Quenched Mild Steel.
  23. 12th National Engineering Conference, Kaduna. Paper presented: Determination of Mechanical Properties of Recycled Thermoplastic Materials from Solid Waste Deposits in Bauchi Metropolis. December 2009.
  24. National Training Workshop for Capacity Building on Energy Demand and Supply Projections in Bauchi State. 14th December, 2009. Organized by the Energy Commission of Nigeria, Abuja, at the Professor Iya Abubakar Community Resource Centre Bauchi.
  25. Sensitization Workshop on Anticorruption organized by NYSC Integrity group/EFCC at Government Day Secondary School Shadawanka Barracks Bauchi. Paper presented: Corruption: The cause of decline in standard of education in Nigeria. May 20, 2010
  26. The Nigerian Institution of Mechanical Engineers (NIMechE) Bauchi Chapter Ordinary General meeting/ Public Lecture Series. Paper presented: Mechanical Engineering Designs. June 23, 2010
  27. 23rd Annual General Meeting and International Conference of the Nigerian Institution of Mechanical Engineers (NIMechE). Alfred Diete Spiff Civic Centre, Port Harcourt, Rivers State. 20th – 22nd October, 2010. Paper presented: Sliding Wear behavior of Normalized Mild Steel Pins under Varying Load, Lubrication and Surface Texture.
  28. Two-Day Workshop on Alternative Energy, Energy Efficiency and Conservation for North East Zone. 9th – 10th November, 2010. Organized by the Energy Commission of Nigeria, Abuja, and University of Maiduguri at El-Kanemi Hall, University of Maiduguri, Borno State.
  29. 24th Annual General Meeting and International Conference of the Nigerian Institution of Mechanical Engineers (NIMechE). Muson Centre, Onikan, Lagos State. 19th – 21st October, 2011. Papers presented: (1) Extraction and Physico-Chemical Analysis of Marula Ssclerocarya Birrea) oil for Biodiesel Production (2) An Appraisal of Combustion Characteristics of Some Nigeria Fuel Woods. October, 2011
  30. Technical Training Workshop on Concentrating Solar Power (CSP) for Electricity Generation in Africa. Organized by African Energy Commission (AFREC) in association with the African Union Commission (AUC) and Energy Commission of Nigeria (ECN); Sheraton Hotels and Towers Abuja, Nigeria 15th  -17th  December 2011
  31. 25th Annual General Meeting and International Conference and of the Nigerian Institution of Mechanical Engineers (NIMechE). Theme: Appropriate Energy Mix for Sustainable National Development. Villa Toscana Hotels, 1 Aguleri Street Independence Layout, Enugu, Enugu State. 17th – 19th October, 2012 
  32. Two – day Inception Workshop on the Review of the National Energy Policy. Organised by ENERGY COMMISSION OF NIGERIA (ECN) Federal Ministry of Science and Technology, in collaboration with THE UNITED NATIONS DEVELOPMENT PROGRAMME (UNDP) and OTHER STAKEHOLDERS. Reiz Continental Hotel Central Business District, Abuja; 10th – 11th September 2013
  33. 26th Annual General Meeting and National Conference and of the Nigerian Institution of Mechanical Engineers (NIMechE). Theme: Strategies for sustainable infrastructural Maintenance Culture: A catalyst for industrial development in Nigeria. Babafunke Ajasin Auditorium, Igbatoro Road, Akure, Ondo State. 23rd  – 25th October, 2013
  34. Two – day Validation Workshop on the Review of the National Energy Policy. Organised by ENERGY COMMISSION OF NIGERIA (ECN) in collaboration with THE UNITED NATIONS DEVELOPMENT PROGRAMME (UNDP). Reiz Continental hotel Central Business District, Abuja; 6th – 7th November 2013.
  35. 27th Annual General Meeting and National Conference and of the Nigerian Institution of Mechanical Engineers (NIMechE). Theme: Challenges of Developing and sustaining infrastructure in Nigeria:The Role of Mechanical Engineer Zaranda Hotel Bauchi, Bauchi State. 8th  – 10th October, 2014
  36. Technical Visit/Training for CPD in Hong Kong (16th – 23rd December, 2014).
    1. Tai Po Water Treatment Works, Tai Po NT
    1. Tolo Highways Widening Tai Po NT-  Hong Kong highway widening project
    1. Sai Kung Sewage Treatment Works, Sai Kung
    1. Town gas Installations, Tai Po Industrial Estate:
  1. 28th Annual General Meeting and National Conference and of the Nigerian Institution of Mechanical Engineers (NIMechE). Theme: “The role of Mechanical Engineers in the Revitalization of the Nigerian Manufacturing Sector”, Abuja, Federal Capital Territory. 21st  – 23rd October, 2015
  2. 29th Annual General Meeting and National Conference and of the Nigerian Institution of Mechanical Engineers (NIMechE). Theme: “Surviving An Economy in Recession: Strategies for Nigerian Mechanical Engineers”, Ibom Hall, Uyo, Akwa Ibom State. 18th – 21st October, 2016
  3. 30th Annual General Meeting and National Conference and of the Nigerian Institution of Mechanical Engineers (NIMechE). Theme: “Mechanical Engineering in the Diversification of Nigerian Economy”, Kaduna Plytechnic, Kaduna. 24th – 27th  October, 2017
  4.  31st Annual General Meeting and National Conference and of the Nigerian Institution of Mechanical Engineers (NIMechE). Theme: “The Revitalization of the Nigerian Industrial Sector For Rural Infrastructural Development: The Role of Mechanical Engineers”, Kano. 23rd  – 26th October, 2018
  5. 32nd Annual General Meeting and National Conference and of the Nigerian Institution of Mechanical Engineers (NIMechE). Theme: “Towards a Modern Manufacturing Technology and Practice for National Economic Growth”, Yenagoa. 8th  – 11th October, 2019